Wattech SW-4040 SWRO Membrane
Wattech RO Membrane
Wattech SW-4040 SWRO Membrane

Wattech SW-4040 SWRO Membrane

Pastikan produk yang anda dapatkan adalah asli dari PFI Watermaker dengan price harga dan kualitas terbaik di Indonesia


It is applicable to the desalination of raw water with salt concentration between 15000ppm and 40000ppm, and make removal for the boron is more than 90%. This membrane model was widely applied to the desalination of sea water and high concentration brackish water, concentration and recycle treatment for high salt wastewater.

Specifications & Parameters

Model SW-4040

Active Membrane Area ft2 (m2) 85(7.9)

Permeate Flow GPD (T/D) 1800(6.8)

Stable Rejection Rate (%)99.7

Operating Limits and Conditions of Membrane Element :

Max.Working Pressure : 1200 psi(8.3MPa)

Max. Feed Water Temperature : 45

Max. Feed Water Flow : 3.6 m3/h

Max. Feed Water SDI : 5.0

Free Chlorine Concentration of Feed Water : 0.1mg/L

pH Range of Feed Water During Continuous Operation : 3 – 10

pH Range of Feed Water During Chemical Cleaning : 2 – 12

Max. Pressure Drop of Single Membrane Element : 15psi(0.1Mpa)



Untuk permintaan penawaran silahkan hubungi



Ruko Blok G/54 – Gudang A/01 

Jl.Canadian Broadway 

Kawasan Pergudangan Commpark – Kotawisata – Cibubur  

Mobile : 081385066789  

Email :